Reviews

How to Remove Watch Links and Adjust Watch Band Easily

It is quite difficult to look for a metal watch that will fit right; most of the bands are only available in standard sizes and is quite expensive to alter these watches to fit you right. However, if you manage to remove a few links by yourself, you will have the perfect fit! Yes, this method might sound difficult and time-consuming; however, if you follow a few simple steps, you will be able to understand how to remove watch links with minimum effort and time.


What are the things you need to remove links from your metal watch?

This is an important point that you need to remember. You cannot simply make use of a hammer that you use to hang a photo frame and a hairpin. However, you also do not have to buy equipment that costs you more than the watch itself.

In most basic watch band link remover boxes, you will find some common tools for the job like a watch tool that will be used for securing the band, a small hammer, pin punches, etc. Some adjust watch band options are available that offer a winder attached to the tool, instead of the hammer. While these tools might look easy to use, they might prove to be equally complicated to use during the pin removal process; on top of that, these pins can get lost easily after the removal process.

The only other tool that you might need is a pair of needle-nose pliers. While the tool is not necessary, there are times when the pins get stuck together. For this, you might need a strong grip to separate them again. Hence it is recommended that you make use of a small container where you can store all the pins and links once you remove them so that they are stored in one place, and you can access them whenever you want to.

PS: here, you will figure out How to Make the Apple Watch App Gone Away from iPhone’s Home Screen and how to remove password from word document, and also here is the best golf GPS watch for your reference.


What are the steps of removing links from your watch?

Here are the detailed steps that can help you understand how to remove watch links:

Adjust Watch Band Step 1. Know how many links you wish to remove

This step is extremely important in the adjust watch band process. If you remove the wrong amount of links or remove them from the wrong place, you watch could possibly sit lopsided. Hence, you need to know exactly how many links you want to remove. To do this, you first need to put on your watch and position it in its regular place where you wear it daily.

Once you do, you need to pull the slack and count the number of excess links. You need to remember that the clasp needs to remain at the center of the watchband. Hence, instead of removing the links from the center, you can take remove equal amounts from both sides of the clasp. This will give you an idea of whether two, four, or six links need to be removed.

Adjust Watch Band Step 2. Clean and prepare your working space

Understandably, removing watch links can be a very delicate process. Hence, you need to check if the working surface is flat and clean, with maximum lighting and minimum distractions. It is recommended that you place barriers on the edge of your working space so that small ferrules and pins do not roll away. This step will help you minimize the risk of losing any important component.

Additionally, you can also place something soft like a mat on the work station so that the metal components do not scratch and leave behind marks on your station. You also need to remember that the process includes hammering, so look for a working space that is secluded as well. This way, you will not disturb anyone else by the sound, and they will not interfere with your work since it will require your entire attention.

Adjust Watch Band Step 3. Collect all your tools in one place

There is a reason why the saying ‘use the right tools for the right job‘ exists. The correct tools will help you finish your job faster and in a more efficient manner. The process of removing links from your watch is not an exception. You need to ensure that you have gathered everything that you need before you get started. Additionally, getting up to gather tools each time you need them will only increase the time duration and divide your attention.

For instance, you can make use of a push-pin tool, which can be used to remove cotter pins. Additionally, you can also use a watch-bracelet holder and a small ball-peen hammer. If you do not have the tools for removing the links, you have the option of purchasing a pre-assembled watch tool kit for the job.

Adjust Watch Band Step 4. Removing the links

Before the actual adjust watch band working process, you need to know beforehand how many links you need to remove and from which point for the correct fit. You will see small arrows in the back of the metal watch that indicates where the cotter pins can be removed. To do this, you need to place the watch on the foam or the holder in such a way that the arrows are facing downwards.

With the help of the hammer, you need to tap lightly at the end of the push-pin tool on the cotter pins’ top until you are unable to do so. Once you see the pin popping through, you can use a small set of pliers or your fingers. However, you need to be very careful during this process; you need to look out for any ferrules or pins that might fall out during the process.

Adjust Watch Band Step 5. Reattaching the remaining links

With the help of the steps mentioned above, you should be able to remove as many links as you feel and adjust watch band. Once you are done, you can start the process of rejoining the metal watch’s ends. To do this, you need to place the watch on the foam or in the holder; but this time, you need to place it in such a way that the arrows are pointing upwards.

You need to place the cotter pin back in the hole; once done, you can make use of the hammer to secure the fit. The same process needs to be done on the other side of the clasp until the bracelet reaches the size you desire. You should always remember that the fastener should come to the center. Additionally, you also need to tap out any ferrules that fell back into place as well.


How tight is a metal watchband supposed to be?

The watch should be snug enough that it does not slide up and down your hand a lot. This means that the watch must not slide more than 2 inches when your arm is resting down or when it is raised upwards, and also not so tight that it leaves imprints on your wrist or it feels uncomfortable.

Also, here is the full iTouch Watch Reviews for your reference.


What should you do if the links do not have the arrow signs?

In case you do not find any arrows on the links, you can push the pins from the side where you are unable to see the pin’s seam. However, if some links have arrows while others do not, you will not be able to remove the links.
Once the strap is one-piece again, you need to try the watch again to check if you have not misjudged how many links that need to come out. If you feel that perhaps two more links need to be removed for the perfect adjust watch band, you can make use of the steps mentioned above to do the same. When you are done, you will see that your watch fits perfectly around your wrist.


With the help of the process above, you will know how to remove watch links. Once the band of your watch fits you in the way you wanted, you can wear it every day. However, you need to ensure that you store the links, pins, and the extra cotter pins in a safe and secure place so that you can make use of them again in the future. If you learn and know how to remove watch links, you will be able to do so very easily.

Related Articles

Back to top button
Close
Close